6-12Kg Cartridge Extinguisher Valve

The 6-12Kg Cartridge Extinguisher Valve 1041 is intended for 6–12 kg cartridge fire extinguisher equipment. Unlike a simple valve used only for agent release, a cartridge extinguisher valve must be matched with the cartridge system, cylinder, pressure gauge, discharge assembly, and internal tube arrangement.

The source material identifies the valve as a component for controlling gas release and pressure relief. Its copper body provides a suitable base for precision machining and threaded connections. The optional plated surface is described as offering a smooth appearance, wear resistance, and easier cleaning. Chrome or nickel plating can be selected according to customer requirements.

The M74X2 inlet thread is intended for a compatible cylinder interface. The M14X1.5 outlet thread can be matched with a suitable discharge component. The M18X1.5 gauge connection allows installation of a compatible pressure gauge, and the M16X1.5 dip tube thread supports the internal tube assembly.

Product Parameters

Plated Surface and Maintenance

The plated surface as having several practical benefits:

1. Smooth and glossy appearance

2. Improved wear resistance

3. Reduced surface damage caused by friction

4. Easier cleaning

5. Better suitability for different environmental conditions

These benefits depend on the selected plating process, coating thickness, substrate preparation, and quality control.

Cartridge System Compatibility

Before selecting the 6-12Kg Cartridge Extinguisher Valve 1041, buyers should verify the complete cartridge extinguisher configuration, including:

1. Cylinder neck thread: M74X2

2. Outlet connection: M14X1.5

3. Gauge connection: M18X1.5

4. Dip tube thread: M16X1.5

5. Cartridge type and operating method

6. Working pressure and safety device requirements

7. Extinguishing agent compatibility

8. Applicable national or international standard

The 22–26 bar safety device setting must be evaluated against the cylinder design and the complete pressure system. It should not be treated as a universal setting for every cartridge extinguisher.

Maintenance and Long-Term Use

The product description states that the plated surface is easy to clean. A practical maintenance section can explain that users should:

1. Keep the valve surface clean and free from corrosive deposits.

2. Inspect the valve and connections according to the extinguisher maintenance procedure.

3. Avoid damaging the plated surface during handling.

4. Check for visible corrosion, impact damage, or leakage.

5. Use only approved replacement parts and service procedures.

These are general maintenance considerations. The exact inspection interval and service requirements should come from the applicable extinguisher documentation.

FAQ

Q: What is the applicable capacity range?

A: 6–12KG cartridge fire extinguishers.

Q: What is the inlet thread?

A: M74X2.

Q: Does the 1041 include a check valve?

A: The specification states “No.”

Q: What surface finishes are available?

A: Chrome or nickel plating is listed according to customer requirements.

Q: Can you provide plating test records?

A: Request the actual coating specification and inspection report if surface performance is important to your project.