6-9KG Cartridge Fire Extinguisher Valve

The 6-9KG Cartridge Fire Extinguisher valve 1046 is designed for 6-9 kg cartridge fire extinguisher assemblies. The source document describes the valve as suitable for different extinguisher models and brands, and mentions potential use with dry powder, water, and foam extinguishing agents. This compatibility should be understood as conditional: the valve must be matched with the correct cylinder, cartridge system, extinguishing agent, pressure rating, and applicable standard.

The valve body is made from high-quality copper. The material is described as offering corrosion and oxidation resistance, helping the valve maintain stable performance in different environments. The internal structure is described as simple, which may support installation, inspection, and replacement of compatible components.

The valve includes clear opening and closing markings, allowing the operator or service technician to identify the operating position more easily. Its pressure gauge interface allows pressure status to be monitored when a compatible gauge is installed.

Product Parameters

A Practical Compatibility Checklist

The 6-9KG Cartridge Fire Extinguisher valve 1046 should be selected by comparing the complete assembly, not just the extinguisher capacity.

The valve can be used with different extinguisher models and brands, but compatibility should still be confirmed by drawing and assembly requirements. A thread match alone does not establish full system compatibility.

Why Choose 1046 for a Cartridge Extinguisher Project?

The 6-9KG Cartridge Fire Extinguisher valve 1046 may be relevant when a buyer needs:

1. A 6–9KG cartridge extinguisher valve.

2. An M74X2 inlet.

3. An M14X1.5 outlet.

4. An M15X1.25 gauge connection.

5. An M16X1.5 dip tube thread.

6. A copper valve with customizable surface treatment.

7. A supplier able to confirm the complete cylinder and cartridge configuration.

Operation and Maintenance

The clear opening and closing markings are useful during routine inspection and emergency operation. The source document also describes a simple internal structure that can facilitate regular inspection and replacement of compatible parts.

Maintenance personnel should inspect:

1. Valve body for corrosion or mechanical damage

2. Operating handle and markings

3. Thread condition

4. Gauge connection for leakage

5. Outlet assembly

6. Dip tube connection

7. Cartridge system compatibility

8. Signs of deformation or wear

Any maintenance, disassembly, or replacement should be performed by qualified personnel following the extinguisher manufacturer’s instructions and applicable regulations.

Environmental Performance

The copper body as having corrosion and oxidation resistance and being suitable for different harsh environments. Actual environmental durability will depend on exposure conditions, storage, cleaning agents, humidity, temperature, and surface treatment. Chrome or nickel plating can be considered when a particular appearance or additional surface protection is required.

FAQ

Q1: What capacity range is model 1046 designed for?

A1: It is specified for 6–9 kg cartridge fire extinguishers.

Q2: What gauge thread does model 1046 use?

A2: The gauge connection is M15X1.25.

Q3: Does model 1046 include a safety device?

A3: The source specification lists no safety device.

Q4: Does it include a check valve?

A4: The source specification lists no check valve.

Q5: How is model 1046 different from model 1041?

A5: Both use an M74X2 inlet and M14X1.5 outlet, but model 1041 is specified for 6–12 kg extinguishers and uses an M18X1.5 gauge connection with a 22–26 bar safety device. Model 1046 is specified for 6–9 kg extinguishers, uses an M15X1.25 gauge connection, and lists no safety device.