1-2KG Compact Foam Fire Extinguisher Valve

The 1-2KG Compact Foam Fire Extinguisher Valve 1069A is designed around the needs of compact 1-2KG foam fire extinguisher assemblies.

Compared with larger trolley extinguisher valves, a small portable valve has to maintain a compact overall footprint while still providing a practical connection to the cylinder and dip tube. This makes dimensional compatibility particularly important during procurement.

The supplied technical information specifies an M30X1.5 inlet thread and M25X1.5 dip-tube connection. No outlet thread, gauge connection, safety device or check valve is listed in the standard parameter table.

This configuration makes the 1069A particularly suitable for buyers who already have a defined extinguisher structure and need a valve that can be matched to their cylinder and internal components.

Product Parameters

Compact Valve Architecture

Copper-Alloy Body

The 1-2KG Compact Foam Fire Extinguisher Valve 1069A uses high-quality copper alloy.

For valve manufacturing, copper-based materials provide useful machining and forming characteristics and are commonly used where threaded connections and sealing surfaces require controlled dimensional accuracy.

For a particular OEM project, the material grade should be confirmed against the customer's technical specification rather than inferred from the general term “copper.”

Plated Surface

The 1069A can be supplied with chrome or nickel plating.

Surface treatment can contribute to corrosion resistance and also provides a consistent external finish. This is useful for extinguishers installed in environments where the valve may be exposed to humidity, handling or frequent cleaning.

Selecting the 1069A for Your Foam Extinguisher

For procurement teams, the most important issue is compatibility.

Before placing a bulk order, confirm:

1. Cylinder Neck

The cylinder must match the M30X1.5 inlet configuration.

2. Dip Tube

The 1-2KG Compact Foam Fire Extinguisher Valve 1069A uses an M25X1.5 dip-tube connection. The tube length and internal position should be checked against the actual cylinder.

3. Discharge System

Because the standard specification does not list an outlet thread, the discharge-side configuration should be confirmed with the supplier according to the customer's extinguisher design.

4. Pressure Monitoring

The standard specification does not list a gauge connection. If a pressure gauge is required for the final foam extinguisher, this should be addressed during engineering review.

5. Safety Configuration

The standard parameter table does not list a safety device. The final extinguisher must therefore be reviewed against the safety requirements of the target market.

Where This Valve Fits in a Foam Extinguisher

The 1069A can be considered for:

● Compact portable foam extinguishers

● Vehicle-mounted small extinguishers

● Residential portable extinguishers

● Office and commercial fire-protection equipment

● OEM extinguisher assemblies with customized valve requirements

The actual application should be determined by the completed extinguisher design, certification requirements and extinguishing-agent configuration.

Surface Treatment for Environmental Resistance

The 1-2KG Compact Foam Fire Extinguisher Valve 1069A can be supplied with chrome or nickel plating according to customer requirements.

Surface treatment is relevant when extinguishers are exposed to humidity, vehicle vibration, industrial environments or marine-related conditions. The supplied material specifically describes the plated surface as helping with corrosion and rust resistance.

For OEM programs, the surface finish can also be selected according to market appearance requirements. Where a particular coating thickness, salt-spray requirement or certification condition applies, the acceptance specification should be agreed before mass production.

Practical Maintenance

Maintenance personnel should focus on the valve's externally visible condition and mechanical operation.

Recommended inspection points include:

● Surface corrosion

● Thread damage

● Operating lever movement

● Sealing condition

● Connection integrity

● Abnormal deformation

For extinguishers stored in vehicles or other environments subject to vibration, periodic visual inspection is particularly useful.

FAQ

Q1: What extinguisher capacity is the 1069A designed for?

A1: 1-2KG foam fire extinguishers.

Q2: What is the inlet thread?

A2: M30X1.5.

Q3: What is the dip-tube thread?

A3: M25X1.5.

Q4: Does the standard version include a check valve?

A4: No.

Q5: Does the standard specification include a pressure gauge connection?

A5: No gauge connection is listed in the supplied specification.

Q6: Can the surface finish be customized?

A6: Yes, chrome or nickel plating can be selected.

Q7: Can the valve be customized?

A7: Yes. Thread configuration, surface finish, handle style and other parameters can be discussed for OEM/ODM projects.